Oversigt over specifikationer
-
Measured variables
Scattered light intensity, dust concentration (after gravimetric comparison measurement)
-
Process temperature
40 °C ... +220 °C
-
Device version
Ex-3K
Ex-2K
Anvendelsesområde
The DUSTHUNTER SP100 is a type-approved measuring device with probe for very low to medium dust concentrations. Installation from one side makes it ideal for thick-walled or double-walled ducts. The measurement is based on the forward scattering of light. An automated check of the zero and reference point as well as a contamination check are on board in the device.
Emissions monitoring at power plants and waste incineration plants
Monitoring of filter systems
Measurements in exhaust gas or exhaust ventilation ducts
Device properties:
Installation from one side
For very low to medium dust concentrations
Automated check of zero and reference point
Hastelloy measuring probe available for corrosive gases
For small to medium duct diameters
Device version for explosive zone 2/22 or 1/21
Fordele
Particularly well-suited for thick and dual-wall channels
Tested for suitability according to EN 15267
Low-maintenance thanks to self-monitoring and contamination monitoring
Quick installation since no alignment is required
Xpert
-
Specialiserede produkter
- Designet til krævende applikationer
Teknisk ydeevne
Enkelhed
Variabel
-
Standardprodukter
- Pålidelige og robuste med lav vedligeholdelse
Teknisk ydeevne
Enkelhed
-
Specialiserede produkter
- Designet til krævende applikationer
Teknisk ydeevne
Enkelhed
Variabel
| FLEX valg | Teknisk ydeevne | Enkelhed |
|---|---|---|
Fundamental Få dækket dine basale målebehov |
Teknisk ydeevne
|
Enkelhed
|
Lean Administrer nemt dine kerneprocesser |
Teknisk ydeevne
|
Enkelhed
|
Extended Optimer dine processer med innovative teknologier |
Teknisk ydeevne
|
Enkelhed
|
Xpert Til de mest udfordrende applikationer |
Teknisk ydeevne
|
Enkelhed
Variabel |
Loading alternative products
Succeshistorier
Måske også interessant for dig
-
-
Betjeningsvejledning (BA)
DUSTHUNTER SP100
Dust Concentration Monitor
EN DA 01/01/2025Sprog:
Engelsk
Version:
01/01/2025
Filstørrelse:
5.3 MB
Filnavn:
8029854_YWL2_OI_DUSTHUNTER_SP100_en_V3-0_2016-08_EHS.pdf
-
-
-
Brancheløsning (SO)
Broad range of solutions for waste-to-energy plants
Endress+Hauser offers ideal automation and safety solutions for collection, sorting and recycling of waste.
Sprog:
Engelsk
Version:
01/01/2025
Filstørrelse:
2.4 MB
Filnavn:
8030416_SO_Waste_en_V1-0_2025.01_EHS.pdf
-
-
-
Kompetencebrochure (CP)
Emission Monitoring Solutions – broad instrument portfolio and longstanding experience
Best in class dust measurement technology with the scattered light and
transmittance dust measuring devices from Endress+HauserSprog:
Engelsk
Version:
01/01/2025
Filstørrelse:
3 MB
Filnavn:
8030014_CP_Dust_Measuring_Devices_en_V3-0_2025.01.pdf
-
-
-
Kompetencebrochure (CP)
Emission Monitoring Solutions – broad instrument portfolio and longstanding experience
An overview brochure about emission monitoring, their measuring
principles and technologies, global requirements and services, a
selection guide and the measuring devices at a glanceSprog:
Engelsk
Version:
01/01/2025
Filstørrelse:
4.5 MB
Filnavn:
8029975_CP_Emission_Monitoring_Solutions_en_V3-0_2025.01_EHS.pdf
-
-
-
Innovation (IN)
DUSTHUNTER SP100 – Proven probe design with forward scattered light measurement
The DUSTHUNTER SP100 is a typeapproved measuring device with probe for very low to medium dust concentrations.
Sprog:
Engelsk
Version:
01/01/2025
Filstørrelse:
2.7 MB
Filnavn:
8030066_IN_DUSTHUNTER SP100_en_V1-0_2025.01_EHS.pdf
-
-
-
Verificerings-DTM
DUSTHUNTER SP100 SDD file
SOPAS device description file for DUSTHUNTER SP100
Sprog:
Language neutral
Version:
05/12/2024
Filstørrelse:
391 KB
Filnavn:
DUSTHUNTER SP100 SDD file
-